RAPTAIR-MF CKP (Speed Sensor) Gap Setting

Technical Support Subject RAPTAIR-MF CKP (Speed Sensor) Gap Setting Document Version Department Revision Details Revised by Tech Engineering Implemented EXT-MF-007 A Tech Document Release SP 9 Nov 2015 BC 10 Nov 2015 N/A 10 Nov 2015 Page 1 of 2 Knowledge Base: www.kb.vmacair.com Email: tech@vmacair.com Web: www.vmacair.com Technical Support: 1(888)241-2289 Toll Free:1(800)738-8622 Fax: 1(877)740-3201 System or Parts affected RAPTAIR-MF  D600005  D600007 Quick Test  Make sure key is in “Off” position.  Remove the service panel off of the RAPTAIR-MF.  Locate the crank position sensor and using a feeling gauge measure the distance between the sensor and the flywheel teeth, the gap should be 0.050 Figure 1 CKP (Speed Sensor) location Technical Support Subject RAPTAIR-MF CKP (Speed Sensor) Gap Setting Document Version Department Revision Details Revised by Tech Engineering Implemented EXT-MF-007 A Tech Document Release SP 9 Nov 2015 BC 10 Nov 2015 N/A 10 Nov 2015 Page 2 of 2 Knowledge Base: www.kb.vmacair.com Email: tech@vmacair.com Web: www.vmacair.com Technical Support: 1(888)241-2289 Toll Free:1(800)738-8622 Fax: 1(877)740-3201 Figure 2 Figure 3 Insert feeler gauge between Speed Sensor and flywheel teeth