A700066 Front Gear Case Assembly

Download: EXT-VR-088 A700066 Front Gear Case Assembly.pdf

Technical Support Subject A700066 Front Gear Case Assembly Document Version Department Revision Details Revised by Tech Engineering Implemented EXT-VR-088 C Tech Article update BDJ MSP N/A 16 Jun 2018 Page 1 of 2 Knowledge Base: www.kb.vmacair.com Email: tech@vmacair.com Web: www.vmacair.com Technical Support: 1(888)241-2289 Toll Free:1(800)738-8622 Fax: 1(877)740-3202 System or Parts affected • Underhood70 (V90000x) compressors. Overview • If an input shaft seal is leaking or input shaft bearing wear is noted in an Underhood 70 compressor, two options are available to remedy the problem: o Oil leaking past seal only: part number A700161 - Seal Retainer Assembly. o Oil leak and bearing or shaft wear: part number A700066 - Front Gear Case Assembly. A700066 Front Gear Case Assembly The A700066 Front Gear Case Assembly (Figure 1) is ready to install and comes with a fastener pack including: • Case screws x7 • O-ring • Woodruff Key • Dowel pins x2 The A700066 Gear Case Assembly fits VMAC aluminum case compressors. A700066 will not fit VMAC’s older steel case compressors. No warranty is expressed or implied when an A700066 Front Gear Case Assembly is sold to fit to a used compressor. Figure 1Technical Support Subject A700066 Front Gear Case Assembly Document Version Department Revision Details Revised by Tech Engineering Implemented EXT-VR-088 C Tech Article update BDJ MSP N/A 16 Jun 2018 Page 2 of 2 Knowledge Base: www.kb.vmacair.com Email: tech@vmacair.com Web: www.vmacair.com Technical Support: 1(888)241-2289 Toll Free:1(800)738-8622 Fax: 1(877)740-3202 A700161 Seal Retainer Assembly A700161 is included in the A700066 Front Gear Case Assembly The A700161 Seal Retainer assembly (Figure 2) includes: • Seal Retainer • Shaft Seal • Retainer O-Ring Figure 2