A700250 - Kit, Inboard AOST, VR150, Ford 2017+

Technical Support Subject A700250 – KIT, INBOARD AOST, VR150, FORD 2017+ Document Version Department Revision Details Revised by Tech Engineering Implemented EXT-ACC-002 A Eng Document Release CM 8 Nov 2017 DB 9 Nov 2017 CM 8 Nov 2017 9 Nov 2017 Page 1 of 4 Knowledge Base: www.kb.vmacair.com Email: tech@vmacair.com Web: www.vmacair.com Technical Support: 1(888)241-2289 Toll Free:1(800)738-8622 Fax: 1(877)740-3201 System or Parts affected • V910020 - VR150, FORD 6.7L F250-F550 2017+ • V910021 - VR150, FORD 6.8L V10 F450-550 2017+ • V910022 - VR150, FORD 6.2L V8 F250-F350 2017+ Index System or Parts affected ............................................................. 1 Overview ....................................................................................... 1 Benefits ......................................................................................... 2 Before you order .......................................................................... 2 Compatible Vehicles .................................................................... 3 About fuel tank options: ............................................................ Error! Bookmark not defined. Special Compatibility Note: Reg cab, 4x4, Diesel Vehicles ..... 4 Check for clearance .................................................................. 4 Overview VMAC now offers an accessory kit for Underhood 150 cfm systems in all current Ford installs to mount the air-oil separator tank inboard of the vehicle frame. This document outlines the vehicle compatibility requirements for A700250. Figure 1– Optional AOST mount location Front of vehicle Technical Support Subject A700250 – KIT, INBOARD AOST, VR150, FORD 2017+ Document Version Department Revision Details Revised by Tech Engineering Implemented EXT-ACC-002 A Eng Document Release CM 8 Nov 2017 DB 9 Nov 2017 CM 8 Nov 2017 9 Nov 2017 Page 2 of 4 Knowledge Base: www.kb.vmacair.com Email: tech@vmacair.com Web: www.vmacair.com Technical Support: 1(888)241-2289 Toll Free:1(800)738-8622 Fax: 1(877)740-3201 Benefits • Increased AOST ground clearance • Compatible with stock Ford running boards and most custom step rails Figure 2 - Standard AOST Location, Passenger Side Frame Rail Figure 3 - A700250 Relocated AOST, Driver’s Side Inboard of Frame Before you order • Read the section below on vehicle compatibility. • Verify the designated vehicle meets the requirements Technical Support Subject A700250 – KIT, INBOARD AOST, VR150, FORD 2017+ Document Version Department Revision Details Revised by Tech Engineering Implemented EXT-ACC-002 A Eng Document Release CM 8 Nov 2017 DB 9 Nov 2017 CM 8 Nov 2017 9 Nov 2017 Page 3 of 4 Knowledge Base: www.kb.vmacair.com Email: tech@vmacair.com Web: www.vmacair.com Technical Support: 1(888)241-2289 Toll Free:1(800)738-8622 Fax: 1(877)740-3201 Compatible Vehicles The A700250 Inboard AOST mount kit is compatible with: • Make: Ford • Years: 2017 onward • Chassis Cab vehicles only (no pickups or box-delete) • Models: F350, F450, F550 • Engine: All • Wheelbase: All • Drive: 4x4 and 4x2 • Cab: All • No midship fuel tank fitted (refer to Figure 4 below) • See Special Compatibility Note, Page 4: Reg Cab, 4x4, Diesel Vehicles Figure 4 – Fuel Tank identification, all vehicles About Fuel Tank Options The 40 gal “aft-of-axle” fuel tank is the more common tank, fitted as standard on almost all chassis vehicles (except F350 SRW). The aft-of-axle tank is available on all chassis vehicles. The aft-of-axle tank is compatible with the A700250 accessory kit. The 26 gal “midship” fuel tank is an available option on most Ford F-series chassis vehicles. The only exception is the F350 SRW, where the midship tank is fitted as standard. The dual tanks option on diesel vehicles also includes this tank. To successfully fit the A700250 accessory kit, this midship tank cannot be present. Technical Support Subject A700250 – KIT, INBOARD AOST, VR150, FORD 2017+ Document Version Department Revision Details Revised by Tech Engineering Implemented EXT-ACC-002 A Eng Document Release CM 8 Nov 2017 DB 9 Nov 2017 CM 8 Nov 2017 9 Nov 2017 Page 4 of 4 Knowledge Base: www.kb.vmacair.com Email: tech@vmacair.com Web: www.vmacair.com Technical Support: 1(888)241-2289 Toll Free:1(800)738-8622 Fax: 1(877)740-3201 Special Compatibility Note: Reg cab, 4x4, Diesel Vehicles Diesel vehicles fitted with a regular cab may not have adequate length in the specified location to accommodate the AOST. When such vehicles are fitted with 4x4 transmissions, the distance between the rear of the transfer case and the DEF tank will not be adequate to fit the VMAC air-oil separator tank. (Vehicles fitted with longer cabs will not experience this problem) Regular Cab 6.7L V8 4x4 Figure 5 Check for clearance To check the fit of the air-oil separator tank before ordering, measure the distance from the DEF tank forward to the 4x4 transfer case (see Figure 6 below). The AOST needs a minimum of 50 in to install successfully (depending on discharge fittings installed on the AOST). If there is insufficient clearance, the DEF tank can be relocated to the outside frame rail. Ford has introduced an approved provision for relocating the DEF tank using Ford components (see Ford SVE bulletin Q-267). Figure 6 – DEF Tank location, diesel vehicles If you have any questions or concerns, contact VMAC Tech Support 1-888-241-2289.