New Articles

  1. How can I prevent my Kubota engine from stalling in low temperatures or high altitudes?

    When operating at altitudes above 5,000 ft (1,500 m) or temperatures below -19 °C (-4 °F), ensure the fuel has a cetane rating above 50. If fuel with a cetane rating of 50 is not available, a cetane booster may be needed.  If you have ...
  2. Where can I take my Lincoln Air Vantage for service?

    Scan the QR code or click on the link to find a Lincoln service centre near you.  Lincoln Service Center Locator If you are experiencing difficulty obtaining service for your Lincoln Air Vantage compressor, contact VMAC Techni...
  3. How do I protect my Filter-Regulator-Lubricator (F.R.L.) and/or Eliminator from freezing in cold weather?

    If the filter/water separator bowl does not drain after use, any water remaining in the bowl can freeze in cold weather, damaging the automatic drain valve in the bowl. By completely depressurizing the air system, the automatic drain valv...
  4. Push-To-Connect (DOT style) Fittings

    Download:  EXT-ALL-021 Push-To-Connect fittings.pdf VMAC uses Push-To-Connect fittings (DOT Style) with our Polytetrafluoroethylene (PTFE) tubing for pressure control and oil scavenging. This article details how to ensu...
  5. Test Procedure for Throttle Commander Pendants

    Download:  EXT-SATC-004 Test Procedure for Throttle Commander Pendants.pdf Technical Support Subject Test Procedure for Throttle Commander Pendants Document Version Department Revision Details Revised by Tech Engineerin...
  6. How can I register my warranty?

    There are four ways your  warranty can be registered with VMAC: Via our website: Warranty Registration | VMAC (vmacair.com)  To submit via email, f ill out the warranty form at the back of the installation manual, s...
  7. What is my VMAC warranty?

    All VMAC products are covered by the "VMAC Standard Warranty (Limited)" while the base compressor is eligible for coverage under the "VMAC Lifetime Warranty (Limited)". https://www.vmacair.com/warranty/ Download VMAC's "Sta...
  8. Air Flow Calculator for Hoses

    By clicking the link below, you will be leaving the VMAC site and entering an outside website over which VMAC has no control. VMAC does not endorse or guarantee the accuracy of any of the information or accept any liability for any loss as a conse...
  9. What hoses do I use?

    While VMAC can supply replacement hoses for any of our VMAC compressor systems, sometimes it is more convenient to source them locally. It is important to remember that replacement hoses must have an AQP liner to ensure compatibility with VMAC...
  10. A700250 - Kit, Inboard AOST, VR150, Ford 2017+

    Download:  EXT-ACC-002 A700250 – KIT INBOARD AOST VR150 FORD 2017.pdf Technical Support Subject A700250 – KIT, INBOARD AOST, VR150, FORD 2017+ Document Version Department Revision Details Revised by Tech Engineering Imp...