Copyright © 2024

Popular Articles

  1. What air tool oil should I use in my Filter / Regulator / Lubricator?

    Last Updated: 17/09/2024 in Knowledge Base Articles Frequently Asked Questions - FAQ
    VMAC's FRL's are compatible with all standard air tool oils. We recommend checking with the tool manufacturer for tool oil recommendations as these could vary between tools, tool manufacturers, and the seasons.  ...

  2. How can I prevent my Kubota engine from stalling in low temperatures or high altitudes?

    Last Updated: 19/01/2018 in Knowledge Base Articles Frequently Asked Questions - FAQ
    When operating at altitudes above 5,000 ft (1,500 m) or temperatures below -19 °C (-4 °F), ensure the fuel has a cetane rating above 50. If fuel with a cetane rating of 50 is not available, a cetane booster may be needed.  If you have ...

  3. Ram Chassis Cab Engine Idle Shut Down Timer

    Last Updated: 15/06/2020 in Knowledge Base Articles
    Download: EXT-ALL-025 Ram Chassis Cab Engine Idle Shut Down Timer.pdf Technical Support Subject Ram Chassis Cab Engine Idle Shut Down Timer Version Document Department Revision Details Revised by Tech Engineering ...

  4. Multifunction AC Generator Replacement - Kubota Powered

    Last Updated: 10/04/2018 in Knowledge Base Articles Multifunction Power System
    Download:  EXT-MF-004 MF AC Generator Replacement Instructions - Kubota powered 003.pdf Technical Support Subject Multifunction AC Generator Replacement – Kubota Powered Document Version Department Revision Details R...

  5. Running Boards and Other Optional Equipment

    Last Updated: 21/09/2018 in Knowledge Base Articles Frequently Asked Questions - FAQ
    While VMAC strives to design systems compatible with optional OEM equipment (such as running boards), it is impractical to develop systems that accommodate every OEM and aftermarket option or add-on. Whenever possible, VMAC endeavors to advise of c...

  6. Why is air escaping from the hole in the regulator of my UNDERHOOD or Gas Driven (G30) Compressor?

    Last Updated: 26/11/2020 in Knowledge Base Articles Frequently Asked Questions - FAQ
    Air escaping from the little hole beside the adjusting screw in the cylindrical regulator cap is normal. This hole must be free and clear in order for the regulator to function properly. If this hole is blocked, the typical symptom is...

  7. 2017+ Ford 6.7 L Throttle Control Adjustment

    Last Updated: 19/05/2020 in Knowledge Base Articles UNDERHOOD
    Download:  EXT-VRTC-010 2017 Ford 6.7L VR Throttle Control Adjustment.pdf INSERT ARTICLE TEXT HERE ...

  8. How do I test the compressor performance of my VMAC?

    Last Updated: 28/02/2023 in Knowledge Base Articles Frequently Asked Questions - FAQ
    By using the A700052 VMAC Test Tool, and following the instructions included with the tool, you can perform a test to confirm your VMAC system is building the cfm and psi it was designed to build. Instructions can also be found in either the Owner...

  9. V3000XX Compressor Replacement

    Last Updated: 11/06/2021 in Knowledge Base Articles UNDERHOOD
    Download:  EXT-BUL-002 V3000XX Compressor Replacement.pdf     Technical Support Subject V3000XX Compressor Replacement Version Document Department Revision Details Revised by Tech. Eng. Implemented B EXT-BUL-002 Tech...

  10. Hydraulic Drive Mounting Dimensions

    Last Updated: 20/08/2018 in Knowledge Base Articles Hydraulic Driven Air Compressor
    Download:  EXT-PRED-001 Hydraulic Driven Mounting Dimensions.pdf Technical Support Subject Hydraulic Drive Mounting Dimensions Document Version Department Revision Details Revised by Tech Engineering Implemente...