Connecting the Eliminator to a PREDATAIR

Download: EXT-ACC-001-Connecting-the-Eliminator-to-a-PREDATAIR.pdf

Technical Support Subject Connecting the Eliminator to a PREDATAIR Document Version Department Revision Details Revised by Tech Engineering Implemented EXT-ELM-001 A Tech Document Release SP 31 Jul 2015 DB 31 Jul 2015 N/A 11 Aug 2015 Page 1 of 1 Knowledge Base: Email: Web: Technical Support: 1(888)241-2289 Toll Free:1(800)738-8622 Fax: 1(877)740-3201 System or Parts affected  PREDATAIR40 (H400001)  PREDATAIR60 (H600002)  ELIMINATOR70 (A800070) Background Configuring the VMAC Eliminator to run with a PREDATAIR that is connected to keyed power. Resolution This configuration will allow the operator to turn the Eliminator on or off as needed to reduce wear and unnecessary start up / shut down of the Eliminator. A single-pole, single-throw (SPST) switch with a minimum 1 amp rating is required for this configuration*. *Not supplied Figure 1 Single pole and throw switch. Minimum 1 amp